B. Hardware-Spezifikationen

Es sind nur die relevanten Eckdaten der verwendeten Hardware aufgeführt. Da vom Netzwerk im KOM-Labor die Router R2 und R3 nicht verwendet wurden, erscheinen diese nicht in der Aufstellung.

1 Linux PC 1 und 2: Intel Pentium III

CPU	Intel Pentium III 733 MHz
RAM	512 MB
Netzwerkkarten	zweimal 3Com EtherLink XL 10/100 (3c905C)

2 Windows 2000/2003 PC: Intel Pentium III

CPU	Intel Pentium III 866 MHz
RAM	512 MB
Netzwerkkarten	zweimal 3Com EtherLink XL 10/100 (3c905C)

3 Mac OS X Notebook: Apple iBook 500

CPU	Motorola PowerPC G3 500 MHz
RAM	640 MB
Netzwerkkarte	integriert (10/100 MBit)

4 Router R5: Cisco 2611XM

(Vgl. Abbildungen B.1 und B.2)

Abbildung B.1: Cisco 2611XM (Frontansicht)

Abbildung: Cisco 2611XM (Rückansicht)

R5#show version 
Cisco Internetwork Operating System Software 
IOS (tm) C2600 Software (C2600-JS-M), Version 12.3(1a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Fri 06-Jun-03 22:07 by dchih
Image text-base: 0x80008098, data-base: 0x81D1F744

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

R5 uptime is 3 hours, 55 minutes
System returned to ROM by power-on
System image file is "flash:c2600-js-mz.123-1a.bin"

cisco 2611XM (MPC860P) processor (revision 0x100) with 93184K/5120K bytes of memory.
Processor board ID JAE072308L8 (1733515545)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 FastEthernet/IEEE 802.3 interface(s)
4 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

5 Router R4: Cisco 2611

R4#show version 
Cisco Internetwork Operating System Software 
IOS (tm) C2600 Software (C2600-IS-M), Version 12.0(3)T3,  RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 15-Apr-99 16:12 by kpma
Image text-base: 0x80008088, data-base: 0x80A05BAC

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

R4 uptime is 33 weeks, 2 hours, 7 minutes
System restarted by power-on
System image file is "flash:c2600-is-mz.120-3.T3"

cisco 2611 (MPC860) processor (revision 0x203) with 30720K/10240K bytes of memory.
Processor board ID JAD04400A18 (3683428458)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
4 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

6 Router R1: Cisco 3640

R1#show version 
Cisco Internetwork Operating System Software 
IOS (tm) 3600 Software (C3640-IS-M), Version 12.1(3a)T4,  RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 03-Oct-00 16:15 by ccai
Image text-base: 0x60008950, data-base: 0x6102E000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

R1 uptime is 2 weeks, 1 day, 4 hours, 45 minutes
System returned to ROM by bus error at PC 0x60331F14, address 0xFFFFFFFF
System image file is "flash:c3640-is-mz.121-3a.T4"

cisco 3640 (R4700) processor (revision 0x00) with 36864K/12288K bytes of memory.
Processor board ID 21965144
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
2 FastEthernet/IEEE 802.3 interface(s)
4 Serial(sync/async) network interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

7 Hub Netgear DS-108

8 Port 100 MBit Hub.

8 Domino LAN-Analyzer DA-360

Abbildung B.3: Domino LAN-Analyzer DA-360 (Frontansicht)

Abbildung: Domino LAN-Analyzer DA-360 (Rückansicht)

Zur Analyse des Netzwerkverkehrs steht ein Domino LAN-Analyzer DA-360 mit eingebautem DominoFE 10/100-Fast-Ethernet Modul zur Verfügung (vgl. Abbildungen B.3 und B.4).